This is my first experience with Itch to Stitch and it won't be the last. They recently came out with a new dress pattern (with a new release discount) that I liked, but wasn't sure about purchasing because I have a big stack of Burda magazines where I could probably find something to recreate it with and ItS was an unknown. Then I remembered that I already had their Seychelles top to make up and evaluate.
Seychelles is somewhat like a woven T top, with an interesting shoulder detail. I'm always on the lookout for things like that because they balance out my figure. The armscyes of Seychelles are cut in somewhat, and the sleeve cap is pleated. Other than that, it has a straightforward darted bodice and faced V neck. The pattern has separate front pieces for each cup size.
Step 1 was figuring out what size to use. The instructions walk you through this, and they had me in a 10 with the C front. I'm normally a 14-16-or even 18 in top sizes and a size 10 seemed crazy to me. The instructions also say to make a muslin (always good advice) so you can be sure I did, expecting them to be proved wrong.
It seems that size 10 was correct!😲 There did need to be a couple of adjustments, but they were easy. I needed to lower the bust dart 1-3/8", widen the sleeve, and widen the hip. The sleeve and hip changes were accomplished just by blending out to one of the larger sizes. I should also mention that the top is meant to be fairly long and I shortened it quite a bit.
The dart was relocated like this (note: this diagram is from a different pattern):
 |
| draw a line through the dart point, parallel to the grainline |
 |
| Draw a box around the dart, cut it out, and slide it straight down the amount needed |
 |
| true up your cutting lines (green) |
 |
| This is the way my pattern piece looked after the alteration. You can see that I also needed to add extra at the hip. |
 |
No comments:
Post a Comment