Showing posts with label Style Arc. Show all posts
Showing posts with label Style Arc. Show all posts

Tuesday, January 20, 2026

Style Arc Sloane

 


I thought I needed a blazer, but maybe I didn't. Sloane didn't work out exactly the way I thought it would. It does give me a couple of options, though.


From the pattern illustration, I was anticipating a relaxed, boxy, casual blazer. Mine ended up looking a lot dressier, and while it is boxy, the fit seems really slim.

The fit was almost a pleasant surprise. The shoulder width is pretty close to mine, much neater than expected. I picked the correct size for my bust, but there is not much ease there. That's unusual for an unfitted jacket.

Altertions I made to the pattern: shortened sleeves by 1-5/8 inches. They are long! Added 5/8 inch to each side seam at the hip for a total of an extra 3-1/4 in circumference. There are pattern pieces for welt and patch pockets. They blend in, but there are patch pockets on my version.


Comments on the pattern: There is shaping in the back seam, which is nice. The sleeves hang well, with a nice curve that follows the arm. There's a back vent. I might have totally misread the directions, but it seems like the way Style Arc has it finished, the interfacing shows. I made a little facing for the underlay so that it would be covered, and opted to miter where the vent joins the hem.

showing the curve of the sleeve

Sloane is unlined, and the front and back facings are the type I like on an unlined jacket, extending all the way to the armscye. This gives more structure to the chest and shoulder, and a sharper look overall. The pattern has shoulder pads as optional. I wanted to include them, but the ones I had on hand were too thick and didn't work. I may try a thinner pad if I can find where to get a few pair without having to order a dozen.

I took the time to do a hong kong finish on the seam allowances so here are the insides to show them.



The main reason that the blazer doesn't look the way I thought it would is due to my fabric choice. It's a cotton with the merest touch of stretch. It looks way dressier than I thought it would, reminding me of some silk dupioni jackets I wore to the symphony back in the day. So I'm not sure of how I'll wear it. 

I could leave it as is and have it for art openings. I'm a mixed media painter, and when I'm in a show I never seem to have the right thing to wear for openings. You want to have something that sets you apart and lets the crowd know you are the artist, but I'm not comfortable in flamboyant clothing. If I wore all black with this blazer, that would be a look I'd like. Downside of this choice is that it would only be worn a few times a year.

Alternately, I could do some topstitching on this to make it look more casual. It would probably get more wear that way.

Right now I'm inclined to keep it for dress-up.

If I ever make this again, I think I would size up and add darts, and make it in a fabric with less crispness. But now that I've made it, I wonder if a blazer really works for the casual life I lead.

Monday, February 10, 2025

Style Arc Hope

This is a pattern that has been sewn by many, many people. It's another one of Style Arc's easy to fit and easy to wear dresses. I've made it before, too...in a larger size and worse, a very crisp cotton. I never wore it. That fabric is probably going to become a jacket lining soon.

I'm happy with this version. It's made from a stable tencel poly knit, medium light-weight. Much better for me in a fabric like this with drape.

Changes from the basic pattern: went one size down on the bodice and sleeve. Kept my original size for the skirt - it just means there are slightly more gathers. Lengthened the skirt 1 inch by just adding on to the bottom. Topstitched the seams where the sleeves and skirt attach to the bodice, to give them more support. Instead of a facing, I did a bound neckline and think it looks right with the topstitched seams. Lastly, I made a wider casing for the sleeve elastic and think that looks nicer.

Down at the bottom is a bad photo of me wearing it. You can see how much taller I am than my dress form. I quit trying to adjust her height because she always ends up collapsing back down.

There's not a lot to say because this is such an easy pattern to sew up. Those huge sleeves do make it a fabric hog, but single layer cutting helps with that. 


topstitching and binding

3/4 inch elastic in the sleeves

ta-da!

It's nice to have a dress with longer sleeves and this is my only one. Hope is a very popular pattern and I do like it, but there are others I like more. It's possible I might make it again, but there are no immediate plans.

Sunday, December 1, 2024

Style Arc Carlisle Jeans

Pants photos are so difficult. While these pictures are not inspiring, I am really happy with this pattern. The Carlisle jeans are the type I like: high rise, with the base of the waistband at the natural waist, and loose straight legs. The pictures have been adjusted to try to show a little bit of detail in the dark indigo denim. 

I also think they are more flattering than these close-to-the-mirror photos show. The top is tucked in only for illustration purposes. Never in real life!

Pattern notes: 

These jeans are really long. As drafted, I think a person who wears heels could wear their very tallest with them and still be OK.

Size was chosen using Style Arc's charts and my full hip measurement. A one-leg muslin, top down center out style, was the starting point and indicated that my usual jeans fitting problems would have to be solved. The rise needed to be adjusted (mine is very short), more width needed for thighs, and there was major back waist gaposis.

When I was messing with the rise adjustments there was a lightbulb moment that will help me with all pants fitting going forward. Previously, I always shortened the front and lengthened the back in various ways. Drag lines in the back could be minimized but never truly went away.

This time, it suddenly made sense to shorten all the way around, front and back. That keeps the horizontal balance lines horizontal. After the length of the rise was correct, I could make adjustments to the back to carve out room for the rear. This made a huge positive difference! I ended up extending both the front and back crotch points a bit, scooping where my fullness is (not at the bottom of the curve), and adjusting the side seam to account for the scoop. When these changes were complete, the back waist actually reached up to my waist, without adding to the top or spreading via wedges.

I changed the construction so that they could be sewn up like men's dress pants with a seam in the center back waistband. That center back seam was sewn after the inseams, outseams, and center front; and after the waistband was attached. That way the center back could be contoured to fit and snug up to my waist. They are very comfortable to wear.

This pair is actually the second I made. The first pair resulted in some sewing drama and that story follows.

This denim is from Fashion Fabrics Club. They have a selection of Japanese selvedge denims that I have used before and liked very much, but there was a lesson to be learned with the first cut.

I did not pre wash that first cut.  In the past, I've had several pieces of denim that got abraded in the washing machine when doing the pre wash, leaving faded streaks all over that couldn't be cut around. The fabrics were ruined, and they were from reputable sources and not cheap. So I sewed the first pair up, true fly and topstitching and all, leaving them long and unhemmed. The idea was to hem after washing/shrinking. Except that when finally washed they shrank to capri length! Oh Regret, thy sting is sharp indeed.

But I was so motivated to get Carlisle in my wardrobe (and besides, all the fitting work had already been done) that I immediately turned around and made this second pair. With pre washed fabric. And then went on a denim shopping spree so there will be more. A black pair is up next.


Wednesday, September 18, 2024

Style Arc Bonnie

Style Arc is really making me happy these days. Their Bonnie pattern has two views - one is a plain and very versatile top with darts - like this one here. The other has dolman sleeves that are gathered up with tabs at the shoulders, no darts. Both button down the back.

The size 16 in this pattern line has been fitting me really well for tops and dresses. Technically I should be using a 14, but I like my things looser. The only fit alteration on this one was lowering the darts by 3/8". Because of a fabric shortage, the back opening was eliminated and replaced by a center back seam. It would be absolutely possible to make this simple top even simpler by cutting the back on the fold. It pulls on over the head easily.

The hem is finished with a facing that they recommend you interface. I left it off in this case but depending on the fabric used for future tops, might put it in. An invisible hand hem finishes it off.

The facings are supposed to be stitched down about an inch and a quarter from the edge, which would look great in something like a linen, but this fabric is a fine lawn and so I opted to just do a narrow topstitched edge. 

The pattern as drafted hits below my waist but is quite short. To my eye and on my body, this length looks great with wide pants (or any wide bottom) and is a good companion for the Style Arc Bob pants.

The shoulders fit well, but the armholes are a tad big and can show a little too much when I move around. I'm not likely to wear this in public without a jacket, so I will fix that for next time and not worry about it on this one.



Here's a closeup of the had-to-have-it print. Da Vinci, Seurat, Cezanne, Van Gogh, Manet, the gang is all here! When I ordered it, I thought it was going to be a quilting cotton and I only bought enough to make a bucket hat. It's a lovely fine lawn, though, and by adding a center back seam there was just enough to make this top. According to Style Arc's calculations, you can sew this up with as little as about 3/4 yard of 58" fabric.


No drag lines. With a few tweaks this will become my basic sleeveless shell. Redrafting a slightly tighter/higher armhole and lengthening by about half an inch ought to do it!

I've been sewing a lot lately and am way behind on doing the write-ups on the summer-y stuff. These blog entries are my notes, so I need to get caught up. The first cool weather item has already been sewn!


Monday, August 12, 2024

Style Arc Marley


 


This is my second attempt with Marley and this time I didn't throw it in the trash!

The first experience was pure frustration. I was trying to follow the instructions which don't seem to match the drawings. The situation was complicated by the contrasting topstitching I was trying to do, so unpicking was a chore and left my fabric looking raggedy. That part was my own fault.

A clue for the future - the notches on the collar do not match to the notches on the body. They match to the shoulder seam, and the notches on the body match to the little half collar stand.

But I still liked the style and it was the type of top that fit perfectly in my travel wardrobe. I tried it again without any fancy touches. The instructions for the collar and center front still didn't make sense, but this time I just set them aside and did what needed to be done. 


Style Arc means for this pattern to be used either as a top or a light jacket. I will be thinking of using it whenever I want something sort of like a camp shirt. It has more shape (Style Arc describes it as boxy, but it does have gentle shaping) and is cuter than a camp shirt, but I would pair it with the same type of bottoms that a camp shirt would go with.

Shaping is achieved with a center back seam, bust darts, and side seam shaping. There are splits in the sleeve seams and at the sides like in the second photo. 3/4 sleeves. The collar has a little half-stand that is inserted in the back only. This is a touch I've liked on several Burda patterns that helps the collar stand up in the back. Thumbs up for that!

The pattern has a small extension at the center front that folds to the inside to make a narrow band. Unless it is buttoned all the way up, the wrong side of the fabric shows where the collar opens, something to keep in mind when choosing material. It would also be easy to draft a front facing that would cover that area.

My fabric is a seersucker from Miss Matatabi. The print is actually a darkish gray on off-white, which is nice. It gives the effect of black & white, but easier to wear for those of us with low-contrast coloring.

Alterations: lowered the bust point and added width at hip level on side and center back seams. Added width at the bicep, too. The sleeves were narrow, especially for something that you are supposed to be able to wear as a little jacket.

This is such a useful style that I'm sure I'll make again. Glad I gave it a second chance!


good length for Bob & Barry pants

Wednesday, July 3, 2024

Style Arc Hope

 Yet another blue Style Arc dress. 😄

Hope has been a very popular pattern for Style Arc. It has a raised waist and gathered skirt similar to their Montana, but with very full and deep raglan sleeves. Probably most people that are interested in the style have already made it. I had trialed it a couple of years ago but ended up not liking the fabric, so this is my first keeper version.

Hope has actual sleeves which makes it a good dress for transitions between warm and cool weather.

Alterations: this is another easy-fitting style that didn't need much. The only alteration I felt was really required was lengthening the bodice 1 inch below the base of the sleeves. I am tall and long-waisted; the extra length preserves the high waisted look when worn  but suits my natural proportions a little better.

There were some other changes that don't come under the alterations heading: 

    1. The keyhole opening on the back neck isn't needed to pull the dress on over my head, so I cut the back on the fold to eliminate it.

    2. During the pre-visualization stage, I really didn't like the way this print would look with a plain round neckline. A little notch at center front was all it took to change it into something I liked better. The only downside to the notch is that it will need to be pressed flat every time the dress is washed, otherwise the corners want to flip out. That's in spite of stay stitching, understitching, and edge stitching. I blame it on the flowy fabric.

    3. You need a generous amout of fabric to make those sleeves, and I was short. I had to shorten the sleeves quite a bit, to the point where they would have been really unflattering once they had been folded up even shorter to form the elastic casing. I made the sleeves appear a little longer by gathering them into a band. The band was edgestitched like the neckline, again because the flowy fabric wasn't going to hold a sharp crease, even with the interfacing.

The fabric was a recent purchase from Fabric Mart. As of today, they still have some of the Ecoliva viscose. I bought two pieces to try and so far I like it. It is similar to a rayon challis but has just a little bit more body and a little heavier drape. It was somewhat wiggly to cut, but not as bad as lightweight rayons. Easy sewing, needed no pressing after laundering except for the neckline notch. It looks best with a hand-sewn invisible hem, IMO.

My photos make it look as if this dress is ankle length but it isn't. I'm getting more and more annoyed with my dressform, with her velcro-like skin that grabs everything and won't let go, her permanent posture problems, and her inability to stay at the correct height. This form never was very useful for fitting, and now it is even losing its usefulness for photos. I guess it is still better than a hanger.

sleeve gathered into 3/4" band

I have one more Style Arc dress in the works (not blue!) and maybe then it will be time to sew something else for a change.

Sunday, June 23, 2024

Style Arc Monty

Monty is another of Style Arc's easy-fitting dresses that I am really enjoying right now - both the sewing and the wearing.

All of them have only needed small length adjustments for fitting. (I am 5'8") Monty here I lengthened 1 inch, just adding on to the lower edge. 

Not having to struggle with fitting problems makes sewing so much more enjoyable! Even loose styles like this one need to sit well on the shoulders and so far the Style Arc patterns do that  for me. Forward or sloping shoulder adjustments have not been required, at least with these dolman type styles.

I did make a couple of minor easy changes. Because I was not sure exactly where the horizontal seam would fall across the chest, I made the faux pocket flaps narrower in case they wanted to project themselves forward. Happy to say that they don't. With this very busy fabric I could have left them off completely because they tend to disappear.

All the corners on the hem were mitered instead of just making the right-angled folds. It doesn't take that much time and really gives a nice result. Being fast is not a big motivator for me. These days I'm more interested in trying to decide what techniques will give the most finished results and are suited to the fabric and style.

The sleeve hems are supposed to be turned and stitched. I finished mine with a 3/4" bias facing instead. The facings were attached before sewing up the side seams, then the sides and the facings were joined all in one long seam. Then the facings were understitched and topstitched.

hem facing inside the sleeve

When cutting out, I moved the center back 1/2" away from the fold, so that the center back pleat is an inch deeper than designed. This was for fit insurance. It wasn't strictly necessary, but I like a little extra ease in the back.

I would have followed Style Arc's directions for the collar but couldn't really understand them, so after puzzling over the diagrams for a while I did it in a way that made sense to me.

This fabric is a Tori Richards dead stock. I've gotten others of that brand from both Fabric Mart and Califabrics, and they all have been very nice. It's too bad that they are all tropical-themed, because there's really a limit to how many aloha-shirt type prints I need. This fabric is really richly-textured and right down my alley - the base is like a seersucker, with a woven in stripe AND a print. All cotton.

This dress is extremely cool to wear, thanks to the airy style with side slits and the light cotton fabric. I think the slits are needed in order to walk, but they make me feel exposed and for that reason this will probably be the only dress I make from this pattern. Would absolutely make the shirt version, though, very likely in one of the Tori Richards lawns that are in the stash. 😉

taking advantage of the mirror in the restroom
while waiting on car repair

 

Sunday, May 26, 2024

Style Arc Vivienne

This is a pattern for an A-line dress that has seams at center front and back, but no side seams. There is just one pattern piece plus facings and pockets, and it is laid out with the grainline going down the sides. The center front and back ends up at an angle, not on the true bias, giving an opportunity for a little stripe play. 

The V neck is extra easy to construct because of the center front seam. Mine looks like a rounded V because the fabric (a coarsely woven cotton/poly blend) is pretty thick. The V is narrow and sits very close to the neck. I like having that extra coverage over the shoulders and chest. It's higher in the back, too, than most other V necks.

The wide facings are topstitched down and the hem is faced.

I chose my size using the size chart and my full bust measurement and no adjustments. This is not a fitted style but because of the shape it is not boxy, either. Everything hangs from the shoulders and will be nice and cool in the summertime. Because my fabric was really ravelly, I left off the welt pockets.

topstitched facing

This was easy and fast to sew. The only tricky part was the first step, the shoulder seams. I kept attaching the wrong front to the wrong back. All that needs to be done is to fold each piece lengthwise and stitch the shoulders. Get that right and you are off to the races.

Another stripe version of this dress would be too repetitive, but it would be nice in a print or a solid. A solid would look good with either the welt pocket detail as designed, or angled patch pockets. If I make it again (probably will!) I'll raise the base of the armhole to guard against bra-flashing and lengthen a couple of inches. The dress hits me below the knee and I'd rather have it closer to a midi length.

Style Arc has a number of easy fitting dress patterns and I am really enjoying them! Even though there is a difference of two sizes between my top and bottom halves, I've been able to cut one straight size in each style I've tried so far. That streamlines the process and sure makes things easier. There's another one of their dresses on the work table just awaiting hemming and buttons/buttonholes that should be finished soon.

Thursday, May 2, 2024

Style Arc Montana x 2



The Montana dress is a popular pattern from Style Arc. The original pattern is similar to this version in blue, with a round neck, extended shoulder that forms a little cap sleeve, and slightly flared skirt gathered onto a high-waisted bodice. No darts on the original pattern.

Two shibori-look print cottons from Miss Matatabi were used for my first version. The pattern intends for you to make a self-lining for the bodice but since I didn't have enough fabric, this one has bias facings on the neck and armholes. 

On Babette it looks like this is a maxi length. That's not accurate; it's more like a midi, although a maxi would be a possibility in the future. The skirt length is the same as the pattern, not altered. Poor Babette is old enough that she keeps returning to her factory settings. I can't make her tall enough or adjust any of her vertical measurements to match me anymore.

I selected my size using my measurements and the sizing charts. This is meant to be a loose style. The 3/4 view shows that there is no shaping to the bodice. Everything hangs straight down.(That is not meant as a negative.)

Easy fit - no shaping

Version 2 was made using the expansion pack for Montana, which includes several different necklines and sleeve variations. This one is in linen, also sourced from Miss Matatabi. For this version, there was enough fabric to do the self lined bodice, which is a great way to finish sleeveless styles. There is no facing to roll out and fuss with, and no topstitching. Nothing against topstitching, but sometimes you want it and sometimes you don't.

The pattern instructions for doing the self-lining will work, but it seemed easier to me to use a burrito method. Sew the neckline (with the collar sandwiched between the layers) right sides together. Understitch, turn, and press. Then, making a burrito, stitch the right sides of one armhole together. Again, understitch, turn, press. Then do the same with the other armhole. Lastly join the sides (bodice to bodice, lining to lining) all in one long seam.

I do like this slit neckline with the little stand up collar. This view, along with most of the others in the expansion pack, has armhole darts that don't really add any shape to the dress, but do eliminate armhole gaping. It was a disappointment that the sleeveless versions are achieved by just leaving off the sleeves. Armholes really need to be drafted differently if there is no sleeve. Look how deep that armhole is. I have to own up to that mistake myself, because I really knew better and should have corrected the armhole before cutting out, but it would have been nicer if Style Arc had done that for me.


Showing the deeeeep armhole

I did make one fitting adjustment on version 2: added 3/4 inch to the length of the bodice. It is still high waisted on me, like it is supposed to be, but a little more in proportion with my long ribcage. That means that it also hits me just a bit longer on the leg, because I still did not change the skirt length.

Both these dresses have been laundered 3 or 4 times already, showing that I am wearing them often! They were not pressed for the photographs - the fabric looks good enough without it. 

After decades of wearing only pants, dresses are suddenly appealing again. Very casual styles like Montana are just the ticket for me and there will likely be more in the future. I wore things like this in the 80s and still enjoy them now.

Wednesday, February 7, 2024

Style Arc Logan Shacket

Why this project? Lighter jacket weather is on its way. This fabric was bought a year ago with a differnt jacket in mind. At first it was meant for the Sewing Workshop Haiku, then later on their Tremont. A window display convinced me that a little less volume would be a good idea. I like back details, like Logan's curved yoke, so it was my pick.
One day those display grids will be stored someplace else

Sizing: straight size 16 based on my full bust measurement.

Fabric: heavy but loosely woven cotton with a lot of texture. Too ravelly for the felled seams intended. I ended up serging and topstitching. It's warmer than I expected and that's a good thing.

to show the texture
Alterations/Modifications: lengthened 1" at the hem. Eliminated the sleeve turn ups by shortening the sleeves 3". The chest pockets are really oversized, so I cut them out without the seam allowance, which reduced the width of each pocket by 3/4". No fancy fitting alterations!

Results: It's a versatile jacket. I really like it and am already wearing it a lot. If I had known how much I wad going to like it, I would have done a Hong Kong finish on the seams.

What's good about the pattern: It's a loose jacket so there didn't need to be a lot of fitting done. It was a little surprising to see how high the sleeve cap was for a style with an extended shoulder, but Style Arc got it right. Those sleeves hang nice and straight with no excess folds or twisting. 

What's bad about the pattern: Not really a pattern fault, but there is a collar stand and that needs to be taken into consideration when choosing the fabric. Mine was thick enough that even though construction of the stand was not a problem, putting a buttonhole in it was. In the end I left the button on the stand but picked out the buttonhole. It would never be worn buttoned all the way up, anyway.

back with deep curved yoke
Denouement: One day I hope to get a photo of myself wearing the jacket to update this blog entry. Meanwhile I wanted to get it written while it was still fresh in my mind. If shackets stay in style, I could see making another one. This would be so nice in a plaid with the yoke on the bias, or with some other treatment that brings more attention to that curved seam.



Burda Curvy Culottes, 1/2023 #409

There's a pop-up sew-along on Pattern Review where they are making culottes during the month of August. Culottes have been popping up in...